0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Mike Gray (mgrayaz)
data
eye 0
favorite 0
comment 0
I liked the concept but wanted to design a modular case to replace an old stand alone case I had missing a drawer. But I also wanted the ability to expand. I have a metal peg board and like the hook attachment method. I have included a peg plate which is just the pegs and a 2mm thick plate you can print to test to make sure it will fit your pegboard. I used supports on the drawer for the handle and printed the bin with the pegs up.
Topics: stl, thingiverse, Organization
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Peter Garcia (petruvius)
data
eye 0
favorite 0
comment 0
Simple tribute to one of my favorite games of all time!
Topics: stl, bioshock, Video Games, thingiverse, Bioshock_Infinite, Big_daddy, bioshock2
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
nick (3ddood)
data
eye 0
favorite 0
comment 0
Use same settings for printing regular Fred. Someone wanted this so here it is. Edit- fixed eyes not being in the right place
Topics: stl, Art, thingiverse
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Daniel O'Grady (ogrda)
data
eye 0
favorite 0
comment 0
This pegboard accessory comes with two friction dowels and a hole for a 1x10 mm neodymium magnet. Simply hot-glue the magnet into place and you are all set. A single magnet can easily hold a wrench or file. Multiple magnets can probably be combined to hold larger objects, but I have not tried that myself. If you need just a little bit more gripping power try stacking one or two more magnets onto the glued-down one. The dowels are made to fit a board of 5 mm depth with holes that are 7 mm in...
Topics: stl, Tool Holders & Boxes, thingiverse, pegboard, neodymium, magnet
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Tim Kouf (TimmyKouf)
data
eye 0
favorite 0
comment 0
Designed as a print in place using a printer with soluble support.
Topics: stl, thingiverse, Camera
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Kyle Hill (Progeny42)
data
eye 0
favorite 0
comment 0
This is a container designing for storing and using Beeswax blocks for sewing (or maybe other hobbies, I don't know!). The base has 3 spikes on which to push the beeswax onto, allowing it to be usable without removing it from the tray, and permanently seated when drawing thread through it. It can then all be stored away in the case, by sliding the tray into the case using the guided rails. ***Note that the spikes on the base should be printed at 100% infill to ensure strength.*** I've attached...
Topics: stl, Sewing, thingiverse, Beeswax Block, Tray, Beeswax, Other, Container
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Carl (BeLittleMaker)
data
eye 0
favorite 0
comment 0
Adaptador para llaves hexagonal Allen con base giratoría que facilita su funcionamiento. El resto de las piezas necesarias se encuentran en el diseño original: https://www.thingiverse.com/thing:4839974
Topics: stl, thingiverse, allen_key_holder, screwdriver_holder, allen_key, hex_key_holder,...
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Mario Bopsic (BOPSIC)
data
eye 0
favorite 0
comment 0
Greetings to all! I'm new to the world of 3D printing, as far as 3D modeling sketchup is concerned, it's in my little finger, for another real job. Recently, my children broke the battery cover on the JVC TV remote, so today I modeled and printed it, with small modifications with a knife, it fit very nicely into the remote. Since this is a common occurrence and I am not the only one to have it happen, I will share the model with everyone in case you need it. Model JVC LT49E770 lcd tv
Topics: stl, thingiverse, Croatia, tv_remote, Other, JVC
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Jarno Westerhuis (Celdr)
data
eye 0
favorite 0
comment 0
Printed this docking station to hang alongside my desk. The assembly consists of two printable parts, the holder and the charger clamp. A full list of components can be found below. Before assembling the docking station make sure to have inserted two M3 heat inserts in the top of the holder. The charger clamp is pushed down the ''dovetails'' on the left and right (inside the holder). Slide the USB-C cable through the hole at the bottom and attach it to the wireless fast charging charger. It is...
Topics: stl, Tool Holders & Boxes, telephone, thingiverse, Charging_dock, Samsung, Galaxy,...
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Anthony (BPERC_Products)
data
eye 0
favorite 0
comment 0
Print out of TPE or TPU. Made for tighter and more secure fit. Was not satisfied with the original one supplied with the rod holder.
Topics: stl, Sport & Outdoors, thingiverse
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Francesco Maciariello (Macia)
data
eye 0
favorite 0
comment 0
I just started making my own soft plastic lures and to save a few bucks I'm making my own molds. This lure measures 60mm from the back to the tip of the claw. The body is 40mm long. I suggest printing in ABS or other high temp plastics. PETG may work but I'm not sure. I've printed some ABS+ molds and did multiple pours without any deformation of the mold. Just remember to USE A LOT OF OIL to avoid sticking. Hope you like it! If so please leave a like on this object!
Topics: stl, bass_fishing, soft, silicone, lures, silicon, fishing_lure, mould, Sport & Outdoors, lure,...
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Michael Börner (AlanShezar)
data
eye 0
favorite 0
comment 0
Inspired by the Cat toy by 3bacak, I designed my own intelligence toy for my cats. Printing: The board is printed with 0.2 resolution and the balls with 0.1. Printed on Anycubic Mega S.
Topics: stl, thingiverse, Pets, cat, toy
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Jim Co (jimbo7)
data
eye 0
favorite 0
comment 0
This is the spacer that goes between the carb and intake on a Honda C70 Passport. The spacing is for the stock carb and intake. There is an o-ring on the original, but I haven't found any leaks so far with PETG.
Topics: stl, thingiverse, c70, intake, honda, carburetor, Other
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Matt Fisher (Teiwaz83)
data
eye 0
favorite 0
comment 0
Tissue holder wall mount. Hooks into the flaps on the sides of the box, allowing tissue boxes of any depth to be used with the older as long as they're the standard footprint and construction. Print 2, mirrored. Print with the "outsides" (the side where the hooks are) flat on the print bed. PETG is probably best for the durability and flexibility. Attach to a wall using 3m sticky strips. Mount them while attached to a tissue box to make sure you get the spacing right. To insert a box,...
Topics: stl, thingiverse, Organization
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
(trohn_javolta)
data
eye 0
favorite 0
comment 0
Remix of a remix, wanted a filament runout sensor that uses these microswitches with roller ball levers that can work both ways (load and also unload filament after a runout is triggered) and since I had these m6 fittings lying around I made threads for them. Also made the sensor a bit smaller. I'm not 100% happy about the smoothness of loading and unloading but it works for me. Also the bearing maybe could be replaced with sth. lighter. Added the step file but it's a mess.
Topics: stl, thingiverse, 3D Printer Accessories
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Param Sundaram (paramsundaram)
data
eye 0
favorite 0
comment 0
Designed up this dealer button to use in home games or have just as something laying around for any poker fan. It was inspired by a dealer button in Pokerstars VR. Printing: Ring - Infil to add weight, supports needed for spade inset. Letter embossing doesn't need it. Spade - Infil to add weight, no supports Letters - Print flat, already scaled to fit nicely in the embossing Star - Infil to add weight. Full print with 4x4x4 walls/top/bottom and 38% infil came to about 48g in weight. Glue in...
Topics: stl, adapter, thingiverse, S9_Plus, Replacement Parts, camera, mahindra, scorpio
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
(makyBa)
data
eye 0
favorite 0
comment 0
Wall Mount Holder for Xiaomi thermometer(LYWSD03MMC) using stapler.
Topics: stl, 3D Printing, thingiverse
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Rod Chan (southbaygsr)
data
eye 0
favorite 0
comment 0
This elephant will support a cell phone in portrait or landscape orientation while storing some pens. Version 2 has the "forehead" removed to provide clearance for any gadgets attached to the back of the phone.
Topics: stl, thingiverse, Mobile Phone
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Anthony Fall (Antonio2727)
data
eye 0
favorite 0
comment 0
Designed up this dealer button to use in home games or have just as something laying around for any poker fan. It was inspired by a dealer button in Pokerstars VR. Printing: Ring - Infil to add weight, supports needed for spade inset. Letter embossing doesn't need it. Spade - Infil to add weight, no supports Letters - Print flat, already scaled to fit nicely in the embossing Star - Infil to add weight. Full print with 4x4x4 walls/top/bottom and 38% infil came to about 48g in weight. Glue in...
Topics: stl, Household, thingiverse
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
mathias secheret (Mr_Matou)
data
eye 0
favorite 0
comment 0
j'en avais marre de devoir racheter un plaque a ma chienne, qui arrivait a les perdre plus vite que ce que je les commandais. du coup j'en ai fabriqué une plutôt fine qui s'accroche a raz du collier. la plaque est modifiable via fusion 360 pour les inscriptions. faites attention au type de police utilisé, certains caractères sont peux ou pas lisible durant la phase d'impression. j'ai utilisé la police de caractère Yu gothic medium, qui rend vraiment très bien.
Topics: stl, thingiverse, Other
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Peter Lancz (PL_Design)
data
eye 0
favorite 0
comment 0
This is a remix of the folding propeller adjusted to the Volantex Phoenix 1600, 2000, 2400 gliders. The original file can be found here: https://www.thingiverse.com/thing:842670 It works great for the Phoenix 2400, and it should fit just fine for the smaller models too.
Topics: stl, thingiverse, R/C Vehicles
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Flo Schäfer (FSchafer)
data
eye 0
favorite 0
comment 0
Part for FD to EF lens conversion
Topics: stl, Canon_EF, Aperture, thingiverse, canon fd, Camera
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
steve_ 4star (speedtoast)
data
eye 0
favorite 0
comment 0
Ice creams are a remix of two models off here. table is a custom piece. printed in resin and PLA
Topics: stl, thingiverse, lolsurprise, dolls_house, IceCream, LOL_Surprise, Playsets, OMG_Dolls
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Wouter Floor (Semafloor)
data
eye 0
favorite 0
comment 0
We designed this globe as a wedding present for a couple of Geologists. It was a massive hit! Printing: In Cura I have moved the model -10mm in the Z-direction. This creates a hole in the bottom. Printed with 100% infill and support touching build plate.
Topics: stl, thingiverse, Earth, Seafloor, Globe, Lithophane, Sea, Other, ocean, Oceanography
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
(slymike)
data
eye 0
favorite 0
comment 0
Just added an antenna mount to the front bumper, it fits my R9 antenna that's used for Express LRS. Printed in TPU with support, I installed the antenna after smearing some "Welder" glue around the inside of the print and held it for a minute or two while the glue cured. Two versions are available; the rounded one isn't so easy to print but it works fine, the hexagonal one holds the antenna better and support material is easier to remove but at the cost of the extra weight. On the...
Topics: stl, thingiverse, ELRS, FrSky_R9, R/C Vehicles, expresslrs, ImpulseRC_Micro_Apex
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Jarek Azevedo (cyciumx)
data
eye 0
favorite 0
comment 0
IMPORTANT NOTE: Concerning the dimensions of this stand; Vallejo has two different bottles for their Game Color line of acrylic paints. This stand was designed to accommodate both of them to my preference which is a nice snug, almost clip-like into place for the shorter neck bottles while being a stable, but not tight fit for the longer neck bottles. There is no telling what percentage of either bottle types one would get in the Game Color Starter Kit and as such, I chose the best midway point...
Topics: stl, thingiverse, Art Tools
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Pablo Varela (pablogaiteiro)
data
eye 0
favorite 0
comment 0
Si sois de los que también os han colado esta basura de sistema, os dejo esta pieza para reparar la bolsa en el punto en el que se rompe una buena parte de ellas, la boquilla. Imprimir en 0,12, fijarse que la capa superior quede impresa en líneas horizontales para que traccione en la bolsa al apretar (en otro caso, puede escurrirse). Yo he usado silicona de juntas, de automoción, tenía un corte de casi 2mm, y no pierde, y de paso protejo ya toda la boquilla, porque es que si no es hoy es...
Topics: stl, thingiverse, Automotive
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
(CreativeFlug)
data
eye 0
favorite 0
comment 0
I made this holder to hold my precision screwdriver from biltema on my pegboard. Pegboard: https://www.biltema.se/en-se/tools/workshop-storage/tool-boards/tool-boards-black-white-2000034992 Screwdriver Set: https://www.biltema.se/en-se/tools/hand-tools/screwdrivers/precision-screwdrivers/precision-slotphillips-screwdriver-set-7-pcs-2000041164 Screws: https://www.biltema.se/verktyg/verktygsforvaring/verktygshallare/verktygshallare-2000044498
Topics: stl, Small, ToolBoard, Tool Holders & Boxes, thingiverse, holder, PegBoard, screwdriver_holder,...
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Jeean Goss (NinjaJeean)
data
eye 0
favorite 0
comment 0
The foot on my keyboard broke so I designed and printed a replacement - this might not work with your keyboard and the two pins may need some sanding to fit.
Topics: stl, thingiverse, foot, substitute, Piece, replacement, Office, keyboard, repair
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Nathan Epperson (Phantom25)
data
eye 0
favorite 0
comment 0
Could definetly be improved. Used 2 x 40mm bolts, 1 x 45mm bolt, 2 nuts. Cases give a bit of room for wiring.
Topics: stl, Video Games, thingiverse, Arduino_Uno, simracing, simulation, simhub, ShakeIt, arduino_case,...
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
chris mckenzie (dinoking27)
data
eye 0
favorite 0
comment 0
this dinosaur is part of the famous ankylosaur group for its many species discovered all over the world
Topics: stl, cretaceous, euoplocephalus, dinosaurs, thingiverse, prehistoric_life, prehistory, prehistoric,...
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
mathias secheret (Mr_Matou)
data
eye 0
favorite 0
comment 0
un petit cendrier de voyage facile a imprimer le remplissage peut aller de 20% - 100% le faire pivoter a 90° pour mettre les sillons verticalement, afin de facilité l'impression
Topics: stl, thingiverse, Other
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Tina Shergold (TINA-TURNUPS)
data
eye 0
favorite 0
comment 0
I basically extended the Small Shelf for IKEA Skadis by nt2021 as I needed a slightly longer one to hold my paint pens.
Topics: stl, Tool Holders & Boxes, thingiverse
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Michael Swiencki (boscopsoultrane)
data
eye 0
favorite 0
comment 0
This holder for Micro SD cards was inspired by the Hidden Spares Storage https://www.thingiverse.com/thing:4877874 by stevenhurry16. I modified his nozzle holder so you can store Micro SD Cards in the Elegoo Neptune 2.
Topics: stl, thingiverse, 3D Printer Accessories
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Rasmus Nielsen (rasniel)
data
eye 0
favorite 0
comment 0
A mosquito net for the VW California that is mush easier to both store and mount than the original one supplied with the camper. Easily fits e.g. up against one of the sides in the drawer under the bench. No need to be flat on the bottom - under everything else in the drawer. Easy to mount in the window. Just slide the window open, insert the net against the alu. profile behind the driver seat and slide the window to the last lockable position. Done! In the current form it is not 100% mosquito...
Topics: stl, thingiverse, vw_camper, Hobby, vw_california, Mosquito_net
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Kamil Janik (jamnik89pl)
data
eye 0
favorite 0
comment 0
PSU Mount designed for a double Z-Axis setup for Creality Ender 3. Supports are shaped to accomodate a Z-Axis motor mount with vibration damper (https://www.thingiverse.com/thing:3434253)
Topics: stl, double, PSU, thingiverse, PSU_Mount, Z-Axis, creality_ender_3, 3D Printer Parts, Ender3,...
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Jesse Miller (synchlink)
data
eye 0
favorite 0
comment 0
I am learning Fusion 360, I've made some other projects but this is the one I really finished. I figured it would be cool to give as a gift for my nephews and nieces because they love Minecraft. I also thought about potentially painting and selling them. If someone else would like to sell it locally at their town go ahead and send me a message and I'll give permission. It probably would work better to use white filament if you plan on painting it, it will make it easier to paint I imagine. I...
Topics: stl, thingiverse, Video Games
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Huds (Huds)
data
eye 0
favorite 0
comment 0
This is a remix! Thingiverse is not allowing me to give proper credit, so this is the next best thing. Thanks to BeeBlaine and MarinerMike for creating these models. https://www.thingiverse.com/thing:4547262 https://www.thingiverse.com/thing:4378624 I mashed these together in rhino 5 and now we have this qr code cover for the ender 3, it is BL-Touch compatible and it fits over the original qr code nicely. I switched colors at layer 38, using a 0.2 layer height, it could also be painted
Topics: stl, replacement_part, thingiverse, remix, replacement_parts, qr code, creality_ender_3, rick roll,...
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Nestor Yanchuk (kvis)
data
eye 0
favorite 0
comment 0
Smart roadster hardtop front bracket. It is originally made of plastic so it should be fine. Part of Smart roadster Hardtop fitting kit. Another name: Smart Roadster Hardtop Baseplate Front Part number: Q0011777V004000000 More to come :)
Topics: stl, Smart_Car, thingiverse, smart452, Automotive, Smart_Roadster, smartroadster
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Nathan Epperson (Phantom25)
data
eye 0
favorite 0
comment 0
Button boxes I used for ignition, starter, and stuff. Used zip ties to secure the clips. Burned a hole in the side with a soldering iron to capture the usb cable.
Topics: stl, Video Games, thingiverse, simracing, ignition, simulation, simulator, starter, arcade_button,...
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Георги Димитров (harizanov87)
data
eye 0
favorite 0
comment 0
Hi, this is a simple update of https://www.thingiverse.com/thing:3652452 - camera mount for ESP32-cam module for Ender 3 v2 extrusions.No screws needed , just slide it in and you are done. Increased the length of the arm so camera will be at perfect position related to the print bed. Printer: Ender 2 v2
Topics: stl, thingiverse, Camera
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
PittCAD (eml1033)
data
eye 0
favorite 0
comment 0
The main objective of this engineering project was to design a mount that allows a DIY E-bike to receive power from a commercial power tool battery. https://www.youtube.com/watch?v=FgjxSFlo72g
Topics: stl, Ebike, thingiverse, 3D printing, Fusion, editable, 3D Printing, XProjects
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Jimmy Zimmerman (Jimmyzimms)
data
eye 0
favorite 0
comment 0
Interstellar Janitors for the biggest of spills! They tower even over Elite Space Jarheads! Shout out to Winterburn for their base kit
Topics: stl, thingiverse, epic40k, epic_scale, Games, epic30K
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Brenda Everitt (bluedragonflymakerco)
data
eye 0
favorite 0
comment 0
Remixed the original hook to hold 1 or 2 spools of 3D print filament.
Topics: stl, thingiverse, Organization
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Budwin 3dSinister (Budwin)
data
eye 0
favorite 0
comment 0
Daredevil Netflix Inspired helmet Enjoy
Topics: stl, thingiverse, 3D Printing, props, daredevil, cosplay, marvel
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Adrián Hidalgo (drzoi)
data
eye 0
favorite 0
comment 0
Juego para aprender las fracciones numéricas a través de la manipulación y la experimentación de los niños
Topics: stl, thingiverse, pie_fractions, maths, MathProjectfractions, game, fractions, Math Art
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Budwin 3dSinister (Budwin)
data
eye 0
favorite 0
comment 0
Batgirl 90s Inspired Mask Enjoy
Topics: stl, thingiverse, 3D Printing, props, dc comics, batgirl, cosplay
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Ian Thompson (enderender3)
data
eye 0
favorite 0
comment 0
Designed up this dealer button to use in home games or have just as something laying around for any poker fan. It was inspired by a dealer button in Pokerstars VR. Printing: Ring - Infil to add weight, supports needed for spade inset. Letter embossing doesn't need it. Spade - Infil to add weight, no supports Letters - Print flat, already scaled to fit nicely in the embossing Star - Infil to add weight. Full print with 4x4x4 walls/top/bottom and 38% infil came to about 48g in weight. Glue in...
Topics: stl, Props, thingiverse
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Budwin 3dSinister (Budwin)
data
eye 0
favorite 0
comment 0
Catwoman 90s inspired Mask Enjoy
Topics: stl, thingiverse, 3D Printing, props, dc comics, cosplay, catwoman
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Fernando Beltran (eferbel)
data
eye 0
favorite 0
comment 0
Estuche para Hive edición de viaje más 3 fichas de expansión. Total 14 fichas. Para no perder tiempo, filamennto y evitar sorpresas, imprimir primero los stl de test y comprobar que las piezas entran en el estuche y que la tapa cierra como correctamente. Si fuese necesario vuelve a imprimir ajustando la expansión horizontal hasta conseguir el resultado que se muestra en el video. https://youtu.be/xd99jJqAVy0 Si necesitas hacerte las fichas las tienes aqui:...
Topics: stl, Box, Juego, thingiverse, Colmena, Hive, Case, Caja, Toys & Games, Game, juego_de_mesa,...
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Budwin 3dSinister (Budwin)
data
eye 0
favorite 0
comment 0
Huntress Inspired Mask Enjoy
Topics: stl, thingiverse, mask, 3D Printing, props, dc comics, huntress, cosplay
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Marco Tasca (Taskino)
data
eye 0
favorite 0
comment 0
Hi For my camping backpack I made some luminescent crystals to hang on the tent to signal it at night. I hope you like it
Topics: stl, crystal, thingiverse, gemstone, signal, accessories, tool, backpack, gems, Accessories,...
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
David Cockburn (WhatWasThatSizeAgain)
data
eye 0
favorite 0
comment 0
There are plenty of Direct Drive conversions around for the Creality printers, unfortunately none of these will work on the Tronxy, the mounting position for the hotend is 9.4mm to the left on the tronxy. So, I reverse engineered the [Direct Drivinator](https://www.thingiverse.com/thing:3589452). My end result isn't so pretty with filleted corners etc. but it's dimensionally perfect for my XY2-Pro. I also added a mount for a cable drag chain and created a mounting to fit the X axis motor...
Topics: stl, 3D Printer Parts, thingiverse
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Robin Wintersteiner (wintees)
data
eye 0
favorite 0
comment 0
or in german: “Toilettenpapierrollenwandabstandshalter” :D This is a simple object to keep the paper from touching the wall. I used a double sided tape to attach it to the wall. resolution: 0.2 mm infill: 20% speed: 70mm/s no support needed material: any, i used PLA Try it out, happy printing!
Topics: stl, thingiverse, free, gadget, wall, toilet, 3D Printing, spacer, paper
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
... ... (aeolisio)
data
eye 0
favorite 0
comment 0
Fix for crewdog badly assembled stratux units. This one fits a pi3 board with internal GPS and makes sure the modules never fall out. Took all of 7 minutes to throw together in fusion.
Topics: stl, Stratux, thingiverse, Other
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Arthur Vieira (ArthurVieira)
data
eye 0
favorite 0
comment 0
This is a Remix of the original mask, which allows the placement of elastics for fixation on the head ;)
Topics: stl, thingiverse, Interactive Art
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Alex Wilke (Custom_Creations_Canada)
data
eye 0
favorite 0
comment 0
Typical Trains station for rural Canada, Small train station built like a brick (Poop) house.. 1/87th HO scale. unfortunately makes it 10 inches long.. thus putting it off for a lot of modelers.. If requested.. I could split this in half to make it into two halfs.. Let me know
Topics: stl, Hobby_King, rail yard, Canada150, thingiverse, scale_model, HO scale, Hobby, Canada,...
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Cooper Thorne (Cooperatbotdotcom)
data
eye 0
favorite 0
comment 0
The King of the Jungle has gone low poly! Low poly remix of Geoffro's Lion HD (no supports required)
Topics: stl, thingiverse, Animals
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Ethan Grant (EGrant713)
data
eye 0
favorite 0
comment 0
I designed this to attach to a ram mount and be tapped out so a piece of threaded rod could be glued in. I've Printed it successfully at 85% infill and It's held up well. This is my 4th revision to these halves and it's the revision I find most successful.
Topics: stl, RamMount, thingiverse, Ram_Mount, Ram, Ram_Ball, DIY
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Charles D'Aoust (wickedsun)
data
eye 0
favorite 0
comment 0
Designed this beer holder to screw on the side of an arcade cabinet. Works pretty well (it holds the beer -- in a glass). The coasters were just super lucky. My design is exactly the same diameter as those so they make for a very nice, non-slip, cheap addon. Screws used: https://www.amazon.com/gp/product/B00MKOIBXM/ Addon: Silicone Coasters: https://www.aliexpress.com/item/4001328631439.html
Topics: stl, thingiverse, Video Games
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Antonino de la Iglesia (DonDepresor)
data
eye 0
favorite 0
comment 0
Adjustable endstops for X, Y and Z axis for a CNC 2418, but may be used on the 3018 as well, or any other models based on 20x20 aluminium profiles. Just made some cable holders, remixed the cable chain from johnniewhiskey https://www.thingiverse.com/thing:2920060 and made a nema 17 chain support. Thats a work in progress so... i'll modify / add parts in the next days (may be...)
Topics: stl, cnc endstops, thingiverse, cnc3018_upgrade, CNC_Router, cnc, cable_management, cnc3018,...
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Charles D'Aoust (wickedsun)
data
eye 0
favorite 0
comment 0
I built an arcade and bought a USB port that is shaped like a Happ button to go to the front of the cab. Unfortunately, the connector is too short for the thickness of the board, so it couldn't be screwed in from the inside. I designed this so that it fits a 30mm hole and it grabs on the button inside the panel instead of only on the outside. I'm not 100% certain it works on a Happ button since I didn't test it but it fit on the USB, so I'm calling this good enough. Let me know if it doesn't...
Topics: stl, thingiverse, Video Games
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Travis Cowart (LilFDguy)
data
eye 0
favorite 0
comment 0
Basic rack to keep shaker balls from connecting themselves in the drawer
Topics: stl, thingiverse, shaker, shaker cup, whisk ball, Containers, whisk, shaker ball
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Mike Malpass (k4en)
data
eye 0
favorite 0
comment 0
Designed a stand to hold the Mars 2 Pro resin tank upright at an angle to allow final draining of resin after emptying the bulk of the tank into the resin bottle. The width of the slot at the bottom accommodates a half paper towel folded to soak up excess resin. Resin tank and stand will fit under the Mars 2 Cover to shield UV while draining. Assembled using four 3x18mm button head screws.
Topics: stl, thingiverse, 3D Printers
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
(astroukulele)
data
eye 0
favorite 0
comment 0
The offset of -1mm wasn't enough for my machine, the hot end was at the same height as the knife blade; I moved this another 4mm down, so the knife blade is lower than the hotend
Topics: stl, thingiverse, 3D Printer Accessories
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Michael Rainey (theraineydaze)
data
eye 0
favorite 0
comment 0
Print with text facing up to avoid any support needs.
Topics: stl, Signs & Logos, thingiverse, logo, text, Hannibal
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Brook Green (bgreen776)
data
eye 0
favorite 0
comment 0
This is a storage system I designed to mount a 4" ABS pipe on the roll cage of my sxs. The caps use a 7mm (actual diameter) or 1/4" Nominal Diameter o-ring made from bulk o-ring stock or you could just print one from TPU. The o-rings are a very tight fit so you will need to lubricate them with silicone or some other PLA safe lubricant. The plugs should work on any tube with a 4" I.D. and the clamps should work on any tube with a 4.5" O.D.
Topics: stl, Tool Holders & Boxes, thingiverse, Roll Bar Mount, Waterproof, Pipe Cap, SXS Storage,...
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
(HOCCO)
data
eye 0
favorite 0
comment 0
ear saver with superman log Printing: standard settings
Topics: stl, Superman, thingiverse, personal_protection, earsaver, Accessories, superman_logo
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
David Evans (Gunterlicious)
data
eye 0
favorite 0
comment 0
A back spacer for the Spyderco Manix 2 XL knife.
Topics: stl, spyderco, thingiverse, knife, Sport & Outdoors, Manix, Backspacer
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Allen Akroush (alleneng)
data
eye 0
favorite 0
comment 0
Designed a screw driver handle to be used with a bit holder. The grip is oversized and much more comfortable than a regular and can be paired with any bit holder.
Topics: stl, thingiverse, Hand Tools
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Jacob Tannahill (Maverick0197)
data
eye 0
favorite 0
comment 0
External Components for the ICS L-86. I do not know if these will fit any other brand L-86. Includes: Picatinny rail that fits in the carry handle (1x 6-32 screw) A picatinny adapter that fits over the rail the carry handle uses (re-use original screws) A heat shield top (I used two zipties to hold in place) A foregrip that fits in front of the handguard (4x 6-32 screws) The foregrip has a chunk cut out of the front so the bipod release can still be used.
Topics: stl, thingiverse, Sport & Outdoors, ICS, L86, picatinny, airsoft, Picatinny_rail, foregrip
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Romain storrer (romanotest)
data
eye 0
favorite 0
comment 0
Topics: stl, thingiverse, R/C Vehicles
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Thomas Fox (LittleFox3DPrinting)
data
eye 0
favorite 0
comment 0
Experimenting with Voronoi style patterns and I came up with three bowls this afternoon, I thought I would share them with everyone.
Topics: stl, pets, thingiverse, Voronoi, Food & Drink, bowls
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Ashley Townsend (atown7)
data
eye 0
favorite 0
comment 0
Jazz up your Dad for Fathers Day with these sweet glasses! Just don't expect him to wear it all day, they aren't crazy comfortable. Just a novelty. I didn't end up using supports so post print I just cleaned and smoothed out the dangly bits so it was a little more comfortable to wear. Turned out fine.
Topics: stl, Glasses, thingiverse
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Robert Wolanski (EliteRobson)
data
eye 0
favorite 0
comment 0
Cable clip. Want bigger? Smaller? Just rescale in sclicer.
Topics: stl, cable_clip, thingiverse, cable_holder, cable_management, Tools
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Nathan Fennelly (Ebediah)
data
eye 0
favorite 0
comment 0
I wanted a frame holder for my bee hives. Thought this design would look nice, so I whipped it up and printed it. Prints perfectly flat on the bed in my Mars 2.
Topics: stl, Sport & Outdoors, thingiverse
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
... ... (aeolisio)
data
eye 0
favorite 0
comment 0
Fix for crewdog badly assembled stratux units. This one fits a pi4 upgraded board with internal GPS and makes sure the modules never fall out. Took all of 7 minutes to throw together in fusion.
Topics: stl, Stratux, thingiverse, Other
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
William Wagner (kwjw3)
data
eye 0
favorite 0
comment 0
Tread for 8mm bearing found here: https://www.amazon.com/gp/product/B08H278R7K/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1 Print with Flexible TPU material .16 mm Layer Height 1 mm Top/bottom thickness 1.2mm wall thickness Used for making the DYI Rotary attachment for Snapmaker Laser Module with 8mm bearings instead of the more expensive 10mm ones Use a small rubber band around the tread if more friction is needed https://forum.snapmaker.com/t/diy-rotary-attachment/16252/28
Topics: stl, 3D Printing, thingiverse
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Douglas Kautzman (kautzmad)
data
eye 0
favorite 0
comment 0
Topics: stl, Tool Holders & Boxes, thingiverse, holder, wall_mount, sand_paper_holder, Sanding
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Timothy Mahan (Timothymahan)
data
eye 0
favorite 0
comment 0
Paper towel holder remix to make plug actually work. Some sanding may be required to have an easier fit. Use supports on the plug.
Topics: stl, Paper_towel, thingiverse, kitchen_tool, paper_towel_holder, Paper, Kitchen & Dining,...
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Christian Wiles (christianwiles)
data
eye 0
favorite 0
comment 0
Fixed non-manifold surfaces, and provided the Rhino files for further modification.
Topics: stl, thingiverse, bag, Kitchen & Dining, clip, chips
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
shawn galley (shawngalley)
data
eye 0
favorite 0
comment 0
Was making garden signs and someone said pickle rick so here it is. Printed in PLA .2 .4 nozzle.
Topics: stl, pickle_rick, thingiverse, Outdoor & Garden, steak, sign, pickle, garden
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Chris Gibson (gibo78)
data
eye 0
favorite 0
comment 0
usb flexible laptop lamp stand for bottle lithophanes. 82mm recess for bottle stl. lamps are commonly found on ebay, aliexpress, amazon etc or through www.kenable.co.uk in UK and are low cost. work in progress but this is an improvement on my 1st test which worked but i wanted to improve it slightly
Topics: stl, stand, thingiverse, lithophane, Decor, base, litho, laptop lamp
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Justin (Tabletop_Robotics)
data
eye 0
favorite 0
comment 0
my design of a Lego compatible breadboard holder. video: https://youtu.be/_rbsrONpjaM Main Chanel: https://www.youtube.com/c/TabletopRobotics Thingiverse: https://www.thingiverse.com/tabletop_robotics/designs Instagram: https://www.instagram.com/tabletop_robotics/ forest pic: https://unsplash.com/photos/jFCViYFYcus?utm_source=unsplash&utm_medium=referral&utm_content=creditShareLink Thanks for following :)
Topics: stl, lego_compatible, thingiverse, breadboard, LEGO, Electronics
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Mamadou BA (naedioba1)
data
eye 0
favorite 0
comment 0
This is a replica of the Creality Ender spool holder. Nozzle Diameter: 0.40 mm Extrusion multiplier 0.80 (Flow Rate: 80%) Retraction Distance: 6.50 mm Retraction Speed: 25.0 mm/s Infill: 50%
Topics: stl, thingiverse, Creality, spool_holder, filament_spool_holder, 3D Printing, Ender_3, naedioba
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Simon (syeco)
data
eye 0
favorite 0
comment 0
My original Casio W-96H watchstrap cracked and broke so I needed a replacement. The W-96H strap has a strange connection to the watch body and couldn't find a strap here that supports it so I thought I would create one myself. I tried to design it to be as close to stock as I could. No supports necessary. Any layer height and fill level should work fine. Printed in TPE. I couldn't remove the buckle from my old strap so I cut the buckle out and added it to the strap while it was printing (see...
Topics: stl, tpe, watchstrap, TPU, thingiverse, casio, watch_strap, casio_watch, casio_W-96H, Accessories
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Anthony Paganini (Pags524)
data
eye 0
favorite 0
comment 0
This is a case for the Samsung T5 SSD drive that is popular for video cameras. The inside of the case has a hole to use a standard camera button shoe screw to mount to a cage or onto the tripod mount for hand held shots. (use your own metal screw, i wouldnt trust a 3d printed one). There is a hole for the USB cable to poke through and there is virtually NO play in the seat where the drive sits, so it wont be free to move around if you have it mounted to a gimbal or running around with it....
Topics: stl, thingiverse, Camera
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Vincent Ng (shannim5)
data
eye 0
favorite 0
comment 0
This is a remix of tito114's excellent TH3D EzABL mount (https://www.thingiverse.com/thing:3012926). I recently purchased an EzABL Pro and was looking for a strong, yet compact mount. I liked tito114's design, but the amount of offset to the left meant the X-carriage couldn't move far enough to the right on an Ender 3 Pro in order to center the probe grid onto the build plate. And since I am using the eB shroud by gibbed (https://www.thingiverse.com/thing:3419531) instead of a fang-type cooler,...
Topics: stl, thingiverse, Ender_3_Pro, 3D Printer Accessories, Creality, EZABL, EZABL_PRO, Ender_3
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Natalie Cheesmond (3DPrintBunny)
data
eye 0
favorite 0
comment 0
A couple of simple BTS stencils. Make sure you have print thin line/wall checked when printing and be extra careful when removing the print from the bed.
Topics: stl, thingiverse, korea, stencil, bts, kpop, stencils, Art, bangtan
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Raymond Puckett (rpuckett92)
data
eye 0
favorite 0
comment 0
I recently got a bunch of wire that didn't come on a spool. Figured I would re-use some old overture filament spools to hold it. I then made a divider to get two colors onto a single spool. I put three of these on a single spool and just hot/glue or super glue into place. I also put some extra holes in the dividers to give more spots to stick the end of the wire through. I put mine on a table undermount PVC rack for easy access and pulling out of the wire. Printed with: 0.4mm layer 100% infill...
Topics: stl, Tool Holders & Boxes, filament_spool, thingiverse, wire_divider
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Jorge Correa (correajl)
data
eye 0
favorite 0
comment 0
Thermomether bulb hast 7mm.
Topics: stl, thingiverse, DIY
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Andre Pedro (apedro)
data
eye 0
favorite 0
comment 0
New pitot tube support for SonicModell Binary model. Other models could also use this pitot mount. Printing: TPU or other flexible material. 30% infill
Topics: stl, thingiverse, R/C Vehicles
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Eric Smith (skore87)
data
eye 0
favorite 0
comment 0
Installed different lead screw bushing and changed my bed to the Wham Bam system so the original version was too tall and would crash the bed into this. I redesigned this to be a press fit and connect to the underside of the 20x40 that mounts to the frame. 4.5mm hole for screw clearance, I suggest using a washer just in case. You will need 10mm screws and t-nuts. 608-2RS bearings.
Topics: stl, thingiverse, leadscrew, ender_5_plus, 3D Printer Accessories
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
BH Marten (BHMarten)
data
eye 0
favorite 0
comment 0
for 20mm tube prevents suction of fish fry
Topics: stl, thingiverse, Hobby, gravel, aquarium
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Sylvain Fiset (Fiset380)
data
eye 0
favorite 0
comment 0
Designed up this dealer button to use in home games or have just as something laying around for any poker fan. It was inspired by a dealer button in Pokerstars VR. Printing: Ring - Infil to add weight, supports needed for spade inset. Letter embossing doesn't need it. Spade - Infil to add weight, no supports Letters - Print flat, already scaled to fit nicely in the embossing Star - Infil to add weight. Full print with 4x4x4 walls/top/bottom and 38% infil came to about 48g in weight. Glue in...
Topics: stl, Tool Holders & Boxes, thingiverse
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Steven Matt (darkpoet)
data
eye 0
favorite 0
comment 0
This is for tinkerers who have a junk box ideally. I may not have described exactly all the extra parts needed. Maybe someone who builds it can do a better job than I in the comments. So, why? Well... When I bought my first Bondtech geared direct drive (good quality clones run about $15US), I was like "wow" this thing fits right on top of my e3d v6 hotend (of which good clones run about $15US also). I won't need anything else. But every design added a chunk of PTFE tubing and the...
Topics: stl, E3D_Hotend, cable_guide, Creality, direct_drive, Bondtech_extruder, Ender_3, E3D_v6,...
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
tyler Acevedo (Matrixzone5)
data
eye 0
favorite 0
comment 0
THis should fit most Tehcnics belt driven turntables of the SL series, It was modeled originally for the technics SL-B260 but works in other SL variants as well.
Topics: stl, thingiverse, vinyl, Music, TURNTABLE_PARTS, turntable, Vinyl_Record
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Joshua Neeley (Jdneeley3)
data
eye 0
favorite 0
comment 0
I love these neopixel rings from Adafruit, but they can be hard to attach to things. I used this design to allow the 16 LED ring to be attached to any flat surface using an M4 bolt and nut. It also includes a diffusing cap(needs to be printed with clear or opaque PLA). Printing the windows inhibits each individual LEDs color from bleeding into each other(so its optional). I developed this using onshape because it's free and collaborative. Here is the link for anyone who would like access to the...
Topics: stl, thingiverse, neopixel, LED, neopixel_ring, electronics, Electronics, electronics_enclosure
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
G C (diagnosis)
data
eye 0
favorite 0
comment 0
This is a cover made for the Reviung34 keyboard. I'm not sure if it will fit others, but wouldn't be surprised if it was pretty close. Prints face side down. Attach to the switch plate of your keyboard using M2 standoffs and screws.
Topics: stl, thingiverse, mechanical_keyboard, 3D Printing, keyboard
0
0.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Dan Knee (PolymerToad)
data
eye 0
favorite 0
comment 0
This a rear bumper for a 1/18 scale PXtoys Speed Pioneer. Probably fits other models, but hasn't been verified.
Topics: stl, thingiverse, Pxtoys, R/C Vehicles, bashing, RC_Car
